BLOG

Flock coating is a coating technique used to give surfaces a different appearance. After the flock coating is applied, the long service life of the coating material can be ensured with the correct maintenance and cleaning methods. In this article, information will be given about how to clean and maintain the flock coating.

Flock Coating Cleaning

Flock coating is a coating material that gives the surface a smooth and velvety feeling. In order for the coating material to have a long service life, it needs to be cleaned regularly. When cleaning the flock coating, care should be taken to avoid damaging the coating material. It is also important to use the right cleaning materials.

Dusting
The first step of flock coating cleaning should be to remove the dust accumulated on the coating material. For the dusting process, a soft brush or a clean cloth can be used.Jul. December dust removal should be done at regular intervals.

Surface Cleaning
When cleaning the flock coating, surface cleaning is also important. For surface cleaning, a suitable cleaning material should be used. A neutral cleaning material should be used that will not damage the flock coating material. In addition, when cleaning the surface, care should be taken so as not to disrupt the structure of the coating material. After the cleaning process is completed, the surface should be rinsed with clean water and waited to dry.Jul.

Cleaning of Stains
Although flock coating is a stain-resistant material, some stains may leave traces on the coating material. For the cleaning of stains, a suitable stain remover should be used. For the removal of stains, a stain remover should be selected that will not disrupt the structure of the coating material and will not fade its colors. After the cleaning of the stains is completed, the surface should be rinsed with clean water and waited to dry. Jul.

Flock Coating Care

Flock coating is a long-lasting coating material. In order to extend the life of the flock coating, the correct maintenance methods must be applied. When performing flock coating maintenance, care should be taken to avoid damaging the coating material.

Step 3: Maintenance and Cleaning Tips
Flock coating can be long-lasting with proper care and cleaning. Below are some tips for flock coating maintenance and cleaning:

Regular Cleaning: Flock coated surfaces are affected by dust and dirt. Therefore, it is important that they are cleaned regularly. Using a hard brush or vacuum, you can remove dust and dirt from the surface. When using a vacuum, make sure that the vacuum uses a brushless hood so that it does not scratch the surface.
Stain Cleaning: The flock coating is very sensitive to liquid stains and dirt. If the stain is not cleaned on time, it may cause the stain to get worse. To clean the stain, make sure to remove excess liquid using a paper towel or a clean cloth.Jul. Next, gently rub the stain using warm soapy water. If the stain still does not come off, you can use an ammonia-free cleaning product. However, it is important to try the cleaning product in a small area first.
Avoid Hot and Humid Environments: The flock coating can be damaged in hot and humid environments. Therefore, it is important to avoid such environments. In particular, it should be remembered that the adhesive of the coating material is affected by moisture. Therefore, provide airflow to protect the flock coated surfaces from moisture.
Be Careful Of Hard Bumps: The flock coating is highly sensitive to hard bumps. Therefore, be careful to protect the coated surfaces from scratches and damage. To protect the surface, special products are also available that will provide protection against impact.
Avoid Chemicals: Flock coated surfaces may be affected by chemicals. Therefore, avoid using acetone, thinner or similar substances on such surfaces. Such chemicals can degrade the coating and cause damage.
Correct Storage: It is also important to store the flock coated surfaces correctly. Protect the coating material from direct sunlight and moisture. In addition, storing the coating material horizontally, Flock coating products damaged by adhesives can be used for many years if properly maintained and maintain their new appearance. For this purpose, the cleaning and maintenance of flock coating products should be carried out regularly. There are some important points to be considered in this regard.
Use a Soft Cloth Flock coating products have a delicate surface and are highly susceptible to scratching. Therefore, it is very important to use a soft cloth when cleaning. In this way, the formation of scratches on the surface of the flock coating is prevented.
Limit Water Use Because flock coating surfaces are highly sensitive to water, it is important to limit water use during the cleaning process. Excessive water use may cause discoloration of the flock coating surface, and may also cause unsightly stains to form on the surface.
Use the Dry Cleaning Method The best method for cleaning flock coating surfaces is the dry cleaning method. In this method, the surface is sprayed with a special cleaning spray, and then dust and dirt are removed with the help of a vacuum cleaner. This method is the best recommended method for cleaning flock coating surfaces.
Use Natural Cleaners It is better to use natural cleaners for flock coating surfaces. This helps to maintain the tint of the surface and remove stains. Also, since it is thought that artificial chemicals can scratch the surface or cause damage, natural cleaners are safer to use.
Intervene Quickly When a Stain Occurs It is important to intervene quickly when a stain occurs on flock coating surfaces. The stain can leave a permanent mark on the surface. When a stain occurs, clean the surface as soon as possible.
Protect from Sunlight Flock coating surfaces may cause their color to fade when exposed to direct sunlight. Therefore, it is important to protect the flock coating surfaces from sunlight. This will help to preserve the color of the surface for a longer time.
Result

As a result, flock coating applications have become a decoration method that has attracted attention with its increasing popularity in recent years. However, it is necessary to be careful for proper cleaning and maintenance of the flock coating surfaces. In this process, it is important to use appropriate cleaning materials to protect the structure of the flock coating surfaces. In addition, the repair of surfaces that are damaged, especially due to reasons such as wear and tear, must also be carried out correctly.

Cleaning and maintenance of flock coating surfaces will help them maintain their durability and aesthetic appearance for many years with the right application.