BLOG

BLOG

Things to Be Considered During the Application of Flock Coating

Things to Be Considered During the Application of Flock Coating

Flock coating is a coating technique used to give different colors and textures to surfaces. Although this coating technique is usually used in the automotive sector, it has recently had a wider application area. The flock application provides a stylish look by giving surfaces a smooth, velvety feeling. However, there are some considerations that should be taken into account when applying flock. In this article, detailed information will be given about what needs to be taken into account during the flock application.

Preparation of The Surface
Flock coating gives the best result if the surfaces are smooth and clean.Jul. Therefore, it is necessary to prepare the surface correctly before starting the flock application. Cleaning the surface from contaminants such as dust, dirt, oil, rust will ensure that the flock coating adheres better to the surface.

Application Temperature
Flock application should be performed within a certain temperature December. Generally, the optimum temperature Decembers for flock application are between 20-25 degrees. The fact that the temperature is in this December allows the flock coating to adhere better. In addition, care should be taken not to dampen the surface during application.

Plating Gun
The gun to be used for flock coating should be selected appropriately. The flock coating gun must ensure that the coating material is distributed correctly. Also, the gun should not spray excessively during the coating process.

Coating Material
The flock coating material must be selected correctly during application. The flock coating material should contain an adhesive that can be easily applied to the surface. In addition, the coating material must be distributed appropriately on the surface.

Coating Process
The flock coating process must be performed correctly. During the coating process, it should be ensured that the surface is properly coated. In addition, it is important to use the right amount of coating material during the coating process. Excessive use of coating material may cause the material to peel off after the coating process. Therefore, using the right amount of coating material will ensure that the flock coating adheres better to the surface.

Drying Time
After the flock coating process is completed, the drying time should be taken into account. Drying of the flock coating material allows it to adhere better to the surface. The drying time may vary depending on the type of coating material, thickness and temperature. Usually, a period of up to 24 hours is needed for the coating material to dry after the flock coating process.

Cleaning
After the flock coating process is completed, it is important to clean the surface. After the coating process, the coating material remaining on the surface should be cleaned. In addition, cleaning the surface will ensure that the flock coating has a longer service life.

As a result, flock coating is a coating technique used to give different colors and textures to surfaces. When applying flock, it is necessary to pay attention to such issues as preparing the surface, applying it at the appropriate temperature December, selecting the appropriate gun and coating material, using the right amount of coating material, taking into account the drying time and cleaning process. When these considerations are taken into account, the flock coating process will provide a stylish appearance, giving the surfaces a smooth, velvety feeling.